Assembling the spindle

  1. Insert the drive unit into the frame and connect the control cable to the circuit board.

  2. Hold the spindle by the drive unit using a vise and an adjustable spanner.

  3. Attach the locking pin and the ring, and tighten the ring nut using an adjustable spanner.

  4. Remove the spindle from the adjustable spanner.

    1. Thread the motor cable through the hole in the frame.

    2. Connect the motor cable.

    • Thread the temperature sensor cable through the hole in the frame.

    • Connect the temperature sensor cable.

  7. Attach the housing.

    1. Thread the indicator cable through the hole in the frame

    2. Connect the indicator cable.

  9. Attach the two screws holding the housing, using an allen key

  10. Attach the cover.

  11. Mount the four screws holding the cover, using a screwdriver.

  12. Hold the spindle by the ring nut, using a vise and an adjustable spanner.

  13. Align and place the MT OSG L on the spindle.

  14. Tighten the MT OSG L.

QMC41-50-HM4-OG | A2410001 - | 8432 0844 81

Published: 2022-11-14

© 2022 Atlas Copco Industrial Technique AB | Legal Notice