Tools

The Tools view lists all tools with brief information:

Field	Description
Controller	If a tool is mapped to a controller, the controller is listed here. If the tool is not mapped to a controller, select Map to controller to map the tool to a controller.
Model	The name of the tool model.
Serial number	The serial number of the tool.
Max torque	The maximum rotation torque, in newton meters
State	One of three states: Connected: is connected to ToolsControl and is mapped to a controller Online: is connected to ToolsControl and is not mapped to a controller Offline: has previously been connected to ToolsControl and is now powered off
Labels	A label that is added for the tool. This can be any text value.

By default, the list of tools is organized by the name of the controller to which they are mapped. Unmapped tools are by default located at the top of the list. The list can be sorted and filtered.

Users can map or unmap one or more tools to or from controllers. To simultaneously map or unmap one or more tools, select the tools and, from the Bulk options box, select Map to controller or Unmap.

Use the Search box to filter and find tools.

Select Export to CSV to export a list of all tools to a comma-separated text file.

Tool Information

To see detailed information for a tool, select the tool. The Tool information view is seen to the right side of the page.

Field availability is dependent on the tool.

Field	Description
Serial number	The serial number of the tool.
Address	The IP address and network port of the tool.
Model	The name of the tool model.
Mac address	The MAC address of the tool.
Application software	The software version.
Parameter Package Version	The parameter package version.
Boot software	The boot software version.
Radio module software version	The radio module software version.
Calibration date	The date when the tool was last calibrated.
Next calibration date	The date when the tool is next calculated to require calibration.
Calibration value	The calibration value, in newton meters
Gear ratio	The ratio of the angular velocity of the input gear to the angular velocity of the output gear.
Max speed	The maximum rotation speed, in revolutions per minute.
Max torque	The maximum rotation torque, in newton meters.
Service date	The suggested maximum number of tightenings between service events.
Remaining tightenings	The number of tightenings that is left until the service interval is reached.
Service interval	The number of tightenings that at a maximum should be performed between two service events. Can be entered in multiples of 10,000.