Result data for bolts is wrong

Cause	Solution
An incorrect number of spindles was specified.	Verify that the correct number of spindles is specified in the Spindle count parameter in Smart AMS Config. In case of multi-spindle tightenings, for example, if Tightening count is set to 3, and Spindle count is set to 2, this means there are 6 bolts in the configuration.

Cause

Solution

An incorrect number of spindles was specified.

Verify that the correct number of spindles is specified in the Spindle count parameter in Smart AMS Config.

In case of multi-spindle tightenings, for example, if Tightening count is set to 3, and Spindle count is set to 2, this means there are 6 bolts in the configuration.