Adding a Visual inspection

In the Home page, tap Parts.

In the Parts page, tap a configured part.

On the upper part of the Edit part page, tap Inspections.

On the upper-right part of the Inspection category, tap Add.

In the Test type window, tap one of the Visual check inspections. In the following, an example of the Visual check- attribute inspection page. The structure is the same for all the inspections, only the categories change.

In the General category of the Add visual – inspection page, configure the inspection parameters.

In the Add visual – inspection page, tap Picture.

In the Picture category, it is possible to:

• Add an image/video: on a USB storage device, save the image/video to use in a folder named media_items, connect the storage device to the STpad and tap the Add button on the right side of the Picture page. In the Add picture dialog box, select the image/video to load and click OK.

  The maximum size of images is 5 MB, the maximum size of videos is 10 MB.

• Remove a picture: on the right side of the Picture page, tap the Remove button.

In the Add visual – inspection page, tap Traceability.

In the Traceability category of the Add visual – inspection page, configure the following parameters:

• Verification code: type the verification code that must be entered or scanned when the inspection is run. This field is case-sensitive.

• Verification code description: to guide the operator, type the description of the verification code dialog box that is displayed when the inspection is run.

Assignable causes: it is possible to:

• List:

  • select an assignable causes list: tap the Search icon () and then select an already configured item in the Assignable causes list page.

  • add a new assignable causes list: tap the Search icon (); on the upper-right corner of the Assignable causes list page, tap Add to configure a new item.

  • delete the link to the assignable causes list: tap the Delete icon ().

• Mandatory: if the check box is selected, the operator must select/type an assignable cause to continue the test.

• Force selection from list: select between:

  • No: the operator can type the assignable cause, without selecting it from the list.

  • Yes: the operator can only select the assignable cause from the list.

  • Inherit: the selection from list can be forced or not forced, depending on the definition of this parameter in the Assignable causes list page.

Corrective actions: it is possible to:

• List:

  • select a corrective actions list: tap the Search icon () and then select an already configured item in the Corrective actions list page.

  • add a new corrective actions list: tap the Search icon (); on the upper-right corner of the Corrective actions list page, tap Add to configure a new item.

  • delete the link to the corrective actions list: tap the Delete icon ().

• Mandatory: if the check box is selected, the operator must select/type a corrective action to continue the test.

• Force selection from list: select between:

  • No: the operator can type the corrective action, without selecting it from the list.

  • Yes: the operator can only select the corrective action from the list.

  • Inherit: the selection from list can be forced or not forced, depending on the definition of this parameter in the Corrective actions list page.

On the upper-right corner of the Add visual – inspection page, tap Save.