Configuring the ToolsNet Connection
On the home menu, tap Configuration > External systems > ToolsNet.
On the General tab, select Enabled.
On the PIM tab, enter the following parameters:
Parameter
Description
Address
Enter ToolsNet server IP address.
Port
Enter ToolsNet server port.
Range value: 1 - 65535; default value: 9014.
On the Configuration tab, enter the following parameters:
Parameter
Description
Station number
Enter the number that ToolsNet must associate to the results collected by STRwrench.
Range value: 1 - 9999.
Station name
Enter the name that identifies STRwrench in ToolsNet tree structure.
Send traces
Select the checkbox to enable STRwrench to send traces to ToolsNet
On the top bar, tap Apply
.
For further information on how to use ToolsNet 8, refer to ToolsNet 8 User Guide.
