Recycling Information for Angle-Head Models
Part | Remarks | Recycle as | |
|---|---|---|---|
1 | Angle gear | Metal, Steel | |
2 | Cap nut | Metal, Steel | |
3 | Clamp | Metal, Steel | |
4 | Screws | 4 pieces | Metal, Steel |
5 | Lid | Metal, Zinc | |
6 | Module board | Electronics, WEEE | |
7 | Screws | 2 pieces | Metal, Steel |
8 | Cable gland | Metal, Brass | |
9 | Set screw | Metal, Steel | |
10 | Module board housing | Metal, Zinc | |
11 | Cable gland | Metal, Brass | |
12 | Needle bearing | Metal, Steel | |
13 | Housing | Metal, Steel | |
14 | Housing | Metal, Steel | |
15 | Screw | Metal, Steel | |
16 | Driver | Electronics, WEEE | |
17 | Stator housing | Electronics, WEEE | |
18 | Snap ring | Metal, Steel | |
19 | Cable rail | Plastic, ABS/PA | |
20 | Screws | 6 pieces | Metal, Steel |
21 | Cover | Metal, Zinc | |
22 | Cable gland | Metal, Brass | |
23 | Screws | 2 pieces | Metal, Steel |
24 | Main board | Electronics, WEEE | |
25 | Flexbushing | 2 pieces | Rubber |
26 | Screw | Metal, Steel | |
27 | Plate | Metal, Steel | |
28 | Spacer | Metal, Steel | |
29 | Cable | Electronics, WEEE | |
30 | Gear unit | Metal, Steel | |
31 | Motor | Electronics, WEEE |
