1. Fixtured Tightening Module
2. Service
3. Maintenance Instructions
4. Maintaining the Feeding Head

Maintaining the Feeding Head

Removing and Replacing the Feeding Head

The Fixtured Tightening Module needs to be repaired in case of damage. An inadequately maintained Fixtured Tightening Module is a source of danger.

• Push the Swivel Arm aside and pull the sleeve of the Quick-change Coupling backwards, and then pull off the Feeding Head (in blue color).

• Attach the clean or the new Feeding Head and then release the sleeve of the Quick-change Coupling.

• Make sure that the Feeding Head is correctly attached by turning and pulling it gently. The Feeding Head should remain attached to the Screw Feeding Front Part.

Cleaning and Checking the Feeding Head

• Clear the dirts of the Feeding Head using an industrial cleaner and a cloth.

• Inspect the Feeding Head visually and check for damage. If damaged, the Feeding Head or the damaged components must be replaced.