1. Fixtured Tightening Module
2. Product Information
3. Overview
4. Intended use of the Fixtured Tightening Module

Intended use of the Fixtured Tightening Module

This product is designed to feed and hold the screws in position and apply the specified Torque to the joint in an automated process. The tightening process is controlled by the Power Focus 6000. No other use is permitted.

• The tightening module should be used only indoors.

• The tightening module should be put into operation with the system components described here.

Permitted use of the Fixtured Tightening Module components

• Fixtured Tightening Module with Screw Feeding Front Part and Driving Tool - Requires a defined torque or a defined angle of rotation.

• Cables (electrical) - Provides electrical supply and controls the screw tightening system.

• Hoses (pneumatic) - Supplies the Fixtured Tightening Module with pneumatic energy from the Screw Feeding Unit.

• Feeding Tube - Transports fasteners from the Screw Feeding Unit to the feeding head of the Fixtured Tightening Module.

• Power Focus 6000 - Controls and monitors the screw tightening process.

• Screw Feeding Unit - Feeds the Fixtured Tightening Module with screws.