Power Focus S (3.10)
Software
Introduction
In this section, you can find the basic information about the product and also the formatting conventions used in the topics.
General Data Protection Regulation (GDPR)
This product offers the possibility to process personal identifiable information such as system user name, role and IP-address. The purpose of this processing capability could be to enhance quality control through traceability and proper access management.
If you decide to process personal data you need to be aware of and comply with relevant personal data protection rules, including, in the EU the GDPR as well as other applicable laws, directives and regulations. Atlas Copco can in no way be held liable for any use made by you of the product.
Conventions
To enhance user understanding, certain formatting conventions are used throughout this document. The formatting conventions used are listed below.
Element | Notation | Description | Output |
---|---|---|---|
General emphasis | In the Program workspace. | To make certain text elements stand out, or to highlight. | Text in Bold |
Graphical User Interface (GUI) items | Select the Function button. | Any reference to items found on screen in the GUI (for example, command buttons, icon names and field names). | Text in Bold |
Graphical User Interface (GUI) Path > | Generally, on the top of the GUI. | Navigation aid which keeps track of the location in the GUI. | For example: Controller > Program > Edit |
User input | Enter a Description for the program. | Any text input by the user. | Text in Bold |
File names | Enter a File Name for the export. | Files either exported from, or imported into the system. | Text in Bold Italic |
Variable and parameter names | Enter a Name for the export. | Variable and parameter names (not values). | Text in Italic |
Variable and parameter values | Enter a VALUE for the export. | Variable and parameter values. | Text in BOLD CAPS |
System output | Client.Domain.Models.ExportImportConfiguration | Any text output by the system. | Text in Monospace |
External links | Links to external sites that have information connected to the document or subject content. These could include:
| Selectable text to external sites | |
Internal documentation links |
If available, these links will be presented below the text. | Selectable text to internal content |
Liabilities and Warnings
Liability
Many events in the operating environment may affect the tightening process and shall require a validation of results. In compliance with applicable standards and/or regulations, we hereby require you to check the installed torque and rotational direction after any event that can influence the tightening result. Examples of such events include but are not limited to:
initial installation of the tooling system
change of part batch, bolt, screw batch, tool, software, configuration or environment
change of air- or electrical connections
change in line ergonomics, process, quality procedures or practices
changing of operator
any other change that influences the result of the tightening process
The check should:
Ensure that the joint conditions have not changed due to events of influence.
Be done after initial installation, maintenance or repair of the equipment.
Occur at least once per shift or at another suitable frequency.
Safety Signal Words
The safety signal words Danger, Warning, Caution, and Notice have the following meanings:
DANGER | DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. |
WARNING | WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. |
CAUTION | CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. |
NOTICE | NOTICE is used to address practices not related to personal injury. |
About the User Guide
The User Guide describes how to set up and configure the Power Focus S.
It is intended for anyone operating or servicing the Power Focus S.
Revision History
Release Number | Revision Date | Revision Description |
---|---|---|
item | item | none |
3.10 | 08/2023 | First official release of the user guide for Power Focus S. |
Installation and Upgrade
In this section, you can find information to help with the initial installation of the product, or upgrading from one version to another.
Accessing the Web GUI
![](../../../assets/img/ac-note-icon-2.png)
To access the Power Focus S Web GUI a computer with a browser installed is needed.
Using an ethernet cable, connect the computer to the service port of the Power Focus S.
On the computer, open a browser and go to 169.254.130.2.
The Power Focus S Web GUI opens.
Configuration
In this section, you can find detailed information about how to create, modify, and verify product settings.
Controller Tab
This tab is used to view controller specific information, such as model, serial number, and software version.
Updating the Software
On the home view, go to the Controller tab, select Software, and go to the Software Update window.
Select Choose File.
Open pop-up window opens.Select the update file, then select Open.
In the Software Update window, select Upload.
Settings Tab
This tab is used to set up the controller specific settings, such as channel and language.
Configuring the Channel
On the home view, go to the Settings tab, select Channel, and go to the Mode window.
In the Channel box, enter the channel number, then select Apply.
Changing the Language
On the home view, go to the Settings tab, select Preferences, and go to the Language window.
Select the ellipsis icon next to the name of the current language.
Choose an item pop-up window opens.In the Choose an item pop-up window, select a language.
![](../../../assets/img/ac-note-icon-2.png)
Changing the language in the Power Focus 8 will also change the language of the Power Focus S Web GUI to the same.