Product Information

General Information

WARNING

Risk of Property Damage or Severe Injury

Ensure that you read, understand and follow all instructions before operating the tool. Failure to follow all the instructions may result in electric shock, fire, property damage and/or severe bodily injury.

Read all Safety Information delivered together with the different parts of the system.
Read all Product Instructions for installation, operation and maintenance of the different parts of the system.
Read all locally legislated safety regulations regarding the system and parts thereof.
Save all Safety Information and instructions for future reference.

In this Section

Safety Signal Words

The safety signal words Danger, Warning, Caution, and Notice have the following meanings:

DANGER	DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING	WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION	CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE	NOTICE is used to address practices not related to personal injury.

Warranty

Product warranty will expire 12+1 months after dispatch from Atlas Copco's Distribution Center.
Normal wear and tear on parts is not included within the warranty.
- Normal wear and tear is that which requires a part change or other adjustment/overhaul during standard tools maintenance typical for that period (expressed in time, operation hours or otherwise).
The product warranty relies on the correct use, maintenance, and repair of the tool and its component parts.
Damage to parts that occurs as a result of inadequate maintenance or performed by parties other than Atlas Copco or their Certified Service Partners during the warranty period is not covered by the warranty.
To avoid damage or destruction of tool parts, service the tool according to the recommended maintenance schedules and follow the correct instructions.
Warranty repairs are only performed in Atlas Copco workshops or by Certified Service Partners.

Atlas Copco offers extended warranty and state of the art preventive maintenance through its ToolCover contracts. For further information contact your local Service representative.

For electrical motors:

Warranty will only apply when the electric motor has not been opened.

Website

Information concerning our Products, Accessories, Spare Parts and Published Matters can be found on the Atlas Copco website.

Please visit: www.atlascopco.com.

ServAid

ServAid is a portal that is continuously updated and contains Technical Information, such as:

Regulatory and Safety Information
Technical Data
Installation, Operation and Service Instructions
Spare Parts Lists
Accessories
Dimensional Drawings

Please visit: https://servaid.atlascopco.com.

For further Technical Information, please contact your local Atlas Copco representative.

Safety Data Sheets MSDS/SDS

The Safety Data Sheets describe the chemical products sold by Atlas Copco.

Please consult the Atlas Copco website for more information www.atlascopco.com/sds.

Country of Origin

For the Country of Origin, please refer to the information on the product label.

Dimensional Drawings

Dimensional Drawings can be found either in the Dimensional Drawings Archive, or on ServAid.

Please visit: http://webbox.atlascopco.com/webbox/dimdrw or https://servaid.atlascopco.com.

Overview

Applications

Torque arms are used for assistance when operating hand held tools such as screwdrivers and nutrunners. The torque arms in the SMC series have a large working range, are easy to position and handle. They are designed for heavy duty operations over a long period of time. The torque arms makes assembly more stable and reduces wear on accessories like bits and taps. It is recommended to use the SMC series of torque arms together with a balancer.

The torque arms reduces the strain on the operators arm, wrist and shoulder by reducing vibration, torque and weight during repeated actions. Even small amounts of repeated actions can lead to repetitive strain injury.

Technical data

Ordering No	4390151031
Model	SMC-TT-25-1150
Length max	1131 mm
Length max	44.54 in
Length min	831 mm
Length min	32.73 in
Max tool holder swivel angle ω	60 deg
Max tool holder swivel angle α	8 deg
Max tool holder swivel angle β	24 deg
Max torque	25 Nm
Max torque	18.4 ft lb
Weight	3.54 kg
Weight	7.80 lb

Technical Product Data

Technical Product Data can be found on either ServAid, or the Atlas Copco website.

Please visit: https://servaid.atlascopco.com or www.atlascopco.com.

Accessories

Required accessories

Balancer adapter A

Balancer adapter A

Applicable for RIL5C.

Balancer
Balancer adapter

Balancer adapter B

Applicable for RIL10C, RIL15C and RIL22C.

Disconnect the snap hook attached to the wire loop. Attach the wire loop to the torque arm hook.

Balancer
Balancer adapter

Disconnect the snap hook attached to the wire loop. Attach the wire loop to the torque arm hook.

Optional accessories

Straight tool adapter B

Adapter between tool holder and clevis.

1. Straight tool adapter

Rigid top fixation B

Rigid top fixation

Gravity center adapter B

Gravity center adapter

Installation

Installation Instructions

Installation Instructions

Attaching balancer to torque arm

Select balancer and balancer adapter kit.
Attach the balancer adapter kit.

Attaching and balancing the tool when mounted on the ceiling

Mount the arm straight above, or as close as possible to the work area.
Attach the tool holder to the tool.
Attach the tool holder to the arm.
Install the set screw on the tool holder and tighten it to 2.5 Nm.
Attach a balancer to the torque arm by using Atlas Copco balancer adapter kit and hook it up with the tool.
Adjust the balancer to carry the weight of the torque arm, the tool holder and the tool.
Adjust the wire stop of the balancer so that the torque arm cannot be fully retracted.
Secure all the screws with the set screws (Refer Spare Parts list for more details).

Working area when mounted on a ceiling

Mounting the torque arm on a ceiling

The mounting point should be straight above, or as close as possible to the work area.
Make sure that the fixation point can handle the weight and the torque of the chosen torque arm.
Attach the auxiliary wire (see exploded views) to a second point that does not limit the working area.

Operation

Operating the torque arm

Operating the torque arm

Make sure that the tool holder is correctly tightened before using the torque arm.

When using the torque arm the first time, start at a low tool torque to get used to how to operate the torque arm.