Install FlexBlank

Each slot on the FlexCarrier must be filled. If there is no need of a FlexDrive in the last FlexCarrier in a daisy chain, add a FlexBlank module to the device slot.

  1. Plug in the FlexBlank module in a slot on the FlexCarrier.

  2. Fasten the FlexBlank module to the FlexCarrier with the screws. Wait to tighten it until all modules are fastened to the FlexCarrier.

PF6 FlexSystem | 3.10

Published: 2023-12-19

© 2023 Atlas Copco Industrial Technique AB | Legal Notice